WirelessHD 1 to 1 UHD 30Hz 30mtr 60Ghz > 7 Gbps TX + RX Kit USB 5V-1A Supports 7.1 + 3D

Product Code: CS-W2H4K

A New era of opportunity providing logical ease of installation and benefits to both the Integrator and the end user.


Gigabit Wireless Connectivity

The NEW CS-W2H4K Wireless HDMI 60 GHz extender system sends high definition audio and video to any HDTV display up to 30 meters. It has a transmitter (1 TX source end) and receiver (1 RX Panel or screen) and both ends are USB powered. It extends HDMI content from computers, Blu-ray and set-top boxes, and to a HDCP-compliant display. This wireless product is comprised of small table-top Sender and Receiver units. It supports resolutions up to UHD 3840 x 2160P at 30 Hz, 3DTV, and 7.1-channels of High Bit Rate (HBR) lossless digital audio. The Wireless for HDMI 60 GHz is specifically designed to transmit within a room. Its signal will not penetrate through walls, facilitating interference-free operation of multiple units in adjacent venues and proximity. Line-of-sight placement of TX to RX will provide the best performance outcome. Its small form-factor, high performance, and near-zero latency, this product is ideal for high-definition A/V extension within a conference room or home theatre type installation, it also eliminates the need for expensive long length HDMI cables.

CS-W2H4K is a 1 TX to 1 RX Kit 4k UHD. It will provide 1 source to 1 Panel or Screen.

The 60 GHz band (59-66 GHz) is an unlicensed band and can be used for a variety of wireless applications. And, because it has up to 7 GHz of bandwidth it allows a very high-speed digital data connection.

Wireless HD has been existing for some time and products being available since 2010. The standard was created by the Wireless HD Consortium and designed from scratch to be used as a video transport method only. Being developed solely for video transmission gives it great advantages rather than using long expensive cables, also for relocation. New Chipsets of recent have allowed this protocol to move forward and provide a viable alternative rather than cabling.


Features

  • Wireless extension of HDMI up to 30mtrs
  • Supports resolutions up to 4k UHD 3840 x 2160P at 30 Hz
  • HDMI Features Supported
  • HDCP pass-through
  • 3DTV pass-through
  • Supports CEC or AVC commands
  • Digital audio streams up to 7.1 channels
  • Uncompressed High Definition A/V from source to display
  • Near zero latency
  • Specifically designed for in-room operation only.
  • Operates in the uncluttered 60GHz frequency region, minimizing the chances of interference from devices such as cordless


 Download PDF here

  • Availability: In Stock

A New era of opportunity providing logical ease of installation and benefits to both the Integrator and the end user.


Gigabit Wireless Connectivity

The NEW CS-W2H4K Wireless HDMI 60 GHz extender system sends high definition audio and video to any HDTV display up to 30 meters. It has a transmitter (1 TX source end) and receiver (1 RX Panel or screen) and both ends are USB powered. It extends HDMI content from computers, Blu-ray and set-top boxes, and to a HDCP-compliant display. This wireless product is comprised of small table-top Sender and Receiver units. It supports resolutions up to UHD 3840 x 2160P at 30 Hz, 3DTV, and 7.1-channels of High Bit Rate (HBR) lossless digital audio. The Wireless for HDMI 60 GHz is specifically designed to transmit within a room. Its signal will not penetrate through walls, facilitating interference-free operation of multiple units in adjacent venues and proximity. Line-of-sight placement of TX to RX will provide the best performance outcome. Its small form-factor, high performance, and near-zero latency, this product is ideal for high-definition A/V extension within a conference room or home theatre type installation, it also eliminates the need for expensive long length HDMI cables.

CS-W2H4K is a 1 TX to 1 RX Kit 4k UHD. It will provide 1 source to 1 Panel or Screen.

The 60 GHz band (59-66 GHz) is an unlicensed band and can be used for a variety of wireless applications. And, because it has up to 7 GHz of bandwidth it allows a very high-speed digital data connection.

Wireless HD has been existing for some time and products being available since 2010. The standard was created by the Wireless HD Consortium and designed from scratch to be used as a video transport method only. Being developed solely for video transmission gives it great advantages rather than using long expensive cables, also for relocation. New Chipsets of recent have allowed this protocol to move forward and provide a viable alternative rather than cabling.


Features

  • Wireless extension of HDMI up to 30mtrs
  • Supports resolutions up to 4k UHD 3840 x 2160P at 30 Hz
  • HDMI Features Supported
  • HDCP pass-through
  • 3DTV pass-through
  • Supports CEC or AVC commands
  • Digital audio streams up to 7.1 channels
  • Uncompressed High Definition A/V from source to display
  • Near zero latency
  • Specifically designed for in-room operation only.
  • Operates in the uncluttered 60GHz frequency region, minimizing the chances of interference from devices such as cordless


 Download PDF here

Write a review

Please login or register to review